Honeywell Control Motor M7284A1004

Part Number: M7284A1004

Manufacturer: Honeywell

Brand: Honeywell

Control Motor, Control Motor, 4-20mA control signal, 120V, Non-Spring Return, 0 Auxilary Switches, 150 in-lbs Torque



12 in stock

*In-stock products usually ship the next day.

Contact us for quantity discounts.


Honeywell M7284A1004 Non-Spring Return Foot Mounted Actuator

Application: Electric
Dimensions: 6 7/16 in. H x 5 1/2 in. W x 7 5/16 in. D
Includes: Transformer and Screw Terminal Adapter
Weight: 5 lb

M7284A1004 Series 72 non-spring return actuator motors control dampers and valves. Accepting a current or voltage signal from an electronic controller, they position a damper or valve at any point between open and closed.

  • Modutrol IV Motor
  • 120 VAC
  • Non Spring Return
  • 150 Lb-In Torque
  • 30-60 Second Nominal Timing
  • Integral Junction Box Provides Nema 3 Weather Protection
  • 4-20 Ma Control Signal
  • 90-160 Degree Stroke
  • 90 Degree Factory Stroke Setting
  • Foot Mounted
  • Dual Ended Square Shaft
  • Modulating
  • Includes Transformer and Screw Terminal Adapter

Modutrol IV. Replaces M744S1005 120V 50/60HZ 29VA 150 LB-IN 90 degree Adjustable Stroke 30-60 second 4-20MA input.

• Integral junction box provides NEMA 3 weather protection
• Motor and circuitry operate from 24 VAC
• Quick-connect terminals are standard, screw terminal adapter available
• Adapter bracket for matching shaft height of older motors available
• Motors have field adjustable stroke (90° to 160°)
• Integral auxiliary switches available factory mounted, or can be added in the field
• Dual shafts, slotted and tapped on both ends – all models
• Auxiliary switch cams – all models
• Fixed torque throughout the entire voltage range
• Designed for normally open or normally closed valves and dampers

Electrical Connections:
Power Consumption:
Ambient Temperature Range:
Internal Auxiliary Switch:
Auxiliary Switch Ratings:
Shaft Dimensions:
Control Signal:
Fail Safe Mode:
Torque Rating:
Torque Rating:
External Auxiliary Switches:
Shaft Rotation:
Factory Stroke Setting
Timing, Nominal:
Shaft Dimensions
Motor shafts:
Deadweight Load on Shaft:
Internal Transformer:
50 Hz, 60 Hz
Underwriters Laboratories Inc. Listed: File No. E4436, Guide No. XAPX for USA and Canada
Screw terminals
Voltage 120V
Driving – 15 VA
CE EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
-40 F to +150 F / -40 C to +60 C
AFL-120 Vac-7.2A; ALR-120 Vac-43.2A; AFL-240 Vac- 3.6A; ALR- 240 Vac-21.6A
Adjustable; 90 to 160 degrees, Symmetrical
375 in. Square
Modulating, 4-20 mA
Non-Spring Return
150 lb-in.
17 Nm
Clockwise upon control signal increase – as viewed from power end, normally closed
90 degrees
30-60 sec
10 mm Square
Dual-ended shaft
Either End-200 lbs., Combined on both Shafts- 300 lbs.