Honeywell Control Motor M7285A1045

Honeywell Control Motor M7285A1045

Part Number: M7285A1045

Manufacturer: Honeywell

Brand: Honeywell

Control Motor, 2-10VDC control signal, 24V, Spring Return, 0 Auxilary Switches, 60 in-lbs Torque

Description

$1,056.15

5 in stock

Contact us for quantity discounts.

  • DESCRIPTION
  • SPECIFICATIONS

Honeywell M7285A1045 Spring Return Foot Mounted Actuator

Application: Electric
Dimensions: 6 7/16 in. H x 5 1/2 in. W x 8 3/4 in. D
Includes: Transformer and Screw Terminal Adapter
Weight: 5 lb

M7284A1045 spring return actuator motors control dampers and valves. Accepting a current or voltage signal from an electronic controller, they position a damper or valve at any point between open and closed.

  • Modutrol IV Motor
  • 120 VAC
  • Non Spring Return
  • 150 Lb-In Torque
  • 30-60 Second Nominal Timing
  • Integral Junction Box Provides Nema 3 Weather Protection
  • 4-20 Ma Control Signal
  • 90-160 Degree Stroke
  • 90 Degree Factory Stroke Setting
  • Foot Mounted
  • Dual Ended Square Shaft
  • Modulating
  • Includes Transformer and Screw Terminal Adapter
Mounting:
Frequency:
Approvals:
Electrical Connections:
Supply:
Power Consumption:
Approvals
Ambient Temperature Range:
Internal Auxiliary Switch:
Auxiliary Switch Ratings:
Stroke:
Shaft Dimensions:
Control Signal:
Fail Safe Mode:
Torque Rating:
Torque Rating:
External Auxiliary Switches:
Shaft Rotation:
Factory Stroke Setting:
Timing, Nominal:
Feedback:
Shaft Dimensions:
Motor shafts:
Deadweight Load on Shaft:
Internal Transformer:
Foot-mounted
50 Hz; 60 Hz
Underwriters Laboratories Inc. Listed: File No. E4436, Guide No. XAPX for USA and Canada
Quick-connect terminals
Voltage 24V
Driving – 20 VA
EN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)
-40 F to +150 F / -40 C to +60 C
0
AFL-120 Vac- 7.2A; ALR- 120 Vac- 43.2A, AFL-240 Vac- 3.6A; ALR-240 Vac- 21.6A
Adjustable, 90 to 160 degrees, Asymmetrical
375 in. Square
Modulating, 2-10 mA
Spring Return
60 lb-in.
8 Nm
Available
Clockwise upon control signal increase – as viewed from power end, normally closed
160 degrees
30-60 sec
No
10 mm Square
Dual-ended shaft
Either End-200 lbs.; Combined on both Shafts- 300 lbs.
None